GET FILE

How to install TWRP recovery of Moto E

1. Download the file recovery of TWRP.
2. We turn off the Moto E, waited a few seconds and turn on in fastboot mode (by pressing the keys on Volume- and on and holding them for about 6 or 7 seconds).
3. We connect the phone to our PC via the USB cable.
4. We go to the folder where you have the Android SDK and open a terminal window (command prompt in Windows).
5. We write (without the quotes, of course) "fastboot flash recovery.img".
6. On the phone, which is in fastboot mode, we pressed to move and select Volume-recovery (by pressing Power).
7. Moto E enters recovery mode, although for the first minute or two still will not have the functionality available touch, so be patient.
8. Select the option reboot system now and thats it; next time we enter the recovery we will at TWRP.

Available link for download

How to restore the Moto X to its factory state

1. We turn off the Moto X.
2. After a few seconds, we turn on, pressing the switch, volume- and starting and keeping pressed for about 3 or 4 seconds. Then let go.
3. We will see the boot menu of Moto X, where we can move down to the volume-key and then select an option by pressing the volume +. We headed to the option and select recovery.
4. We will see a logo of an injured android, and now we press keys and volume-volume + simultaneously for about 5 seconds, then pressed the button.

Available link for download

CARA FLASH MOTOROLA MOTO G 2nd Gen

CARA FLASH MOTOROLA -MOTO G 2nd Gen

Untuk Firmwarenya
untuk firmware lengkapnya

UNTUK LANGKAH-LANGKAHNYA
1. Download RSD LITE SOFTWARE
2. Download Firmware yang sesuai
3. Instal RSD LITE SOFTWARE
4. Instal Patch file RSD LITE SOFTWARE
5. Sekarang saat nya Flashing HP nya
6. Jalankan RSD LITE SOFTWARE
7. Kemudian Klik menu “Config”
8. Klik Switch to MTK
9. Sambungkankan HP motorola yang akan di

Flash via Kabel Data
10. Sambungkan dengan mode Port Mode bukan Mass Storrage ya
11. Bila tidak terdeteksi Hp nya maka coba lagi Instal driver Hp nya
12. Sekarang klik “Browse” file yang berformat (.mzf) yang sudah kalian downlod
13. Matikan HP, kemudian lepaskan Battere dan kabelnya
14. Lalu konekan cabel ke HP, kemudiaan tekan volume bagian bawah, masukan battere dan nyalakan..ingat jangan melepaskan volume down sebelum muncul type Hp di RSD LITE nya
15. Langkah no 14 ini hanya untuk mendeteksi hp pada progra RSD LITE nya nanti akan muncul type software HP pada No 1 di RSD LITE
16. Bila flashing pada no satu tidak berjalan otomatis maka klik star, di tombol atas dan tunggu sampai 100%
17. Bila sudah sekarang lepaskan Hp dan nyalakan
18. Langkah selanjutnya adalah klik “browse” dan carilah file yang berformat (.hs) lalu open
19. Sambungkan Hp dengan mode Port Mode
20. Lalu klik tombol start
21. Tunggu sampai selesai setelah selesai maka HP akan otomatis menyala
22. lalu tekan *#8375# untuk melihat versi software
23. SELESAI

Available link for download

Moto X 2nd gen to launch without simultaneous voice and data requires future Advanced Calling 1 0 update

Being an Android smartphone user on Verizon means you’re used to some of the finer things in life such as great coverage, getting nickeled and dimed for everything imaginable, and being able to use both voice and data at the same time. Simultaneous voice and data has been available on most Android phones by coming equipped with two separate radios and maintaining separate connections to the 1x and EVDO or LTE networks. Verizon’s upcoming Moto X (2nd gen), set to launch on September 26th, will handle simultaneous voice and data quite differently from previous Android phones.
Verizon’s new Moto X will be the first Android device that requires Verizon’s Advanced Calling 1.0 to enable simultaneous voice and data connections. Oddly enough, the Moto X is not launching with Advanced Calling 1.0 support and will require a software update that’s slated for later this fall. The new Moto X isn’t being singled out here, this change and requirement will be coming to future Verizon phones as well.

Verizon’s Advanced Calling 1.0 enables VoLTE (Voice over LTE), think VoIP for cellular networks. This means if you make a phone call while on Verizon’s LTE network, your phone will no longer use the CDMA connection to place the call. Your call will go out over the LTE data connection instead. Thanks to the bandwidth available on LTE networks, your phone has a large enough data connection for all of your voice and data needs. Besides simultaneous voice and data, Advanced Calling 1.0 also adds high definition voice calls, 1-way or 2-way video calls, and 6-way conference calls. Of course these features are only available if you’re in Verizon’s LTE coverage area and are using a Verizon VoLTE-enabled smartphone.
While this might be a bit disheartening if you’re an avid user of simultaneous voice and data due to a pending future update that enables this functionality, Verizon is headed in the right direction. This is all part of their grand scheme to do away with their aging CDMA network. This is the first step towards the future.

Available link for download

How to install TWRP recovery of the Moto G

fastboot flash recovery recovery.img

Available link for download

CyanogenMod 13 ANDROID M Available For Moto G 2014

Available link for download

Smart Clip2 Software v1 17 01 More Moto devices and more fw versions supported

Smart-Clip2 Software v1.17.01. More Moto devices and more fw versions supported

---

Smart-Clip2 Software v1.17.01 is out! 


1. The solution for the most recent firmware versions of Moto
If Smart-Clip2 Software reports the following message:
"This baseband version is not supported. Try downgrading it."
while youre working with new Moto devices, please do so by following the steps listed in this manual.
This is a quick and simple procedure that doesn’t require root and bootloader unlock.


2. New Moto models have been tested and added to the list of supported devices:
? XT1524
? XT1540
? XT1542
? XT1562
? XT1563
? MOTO G3
? Moto X Play
? Moto X+1
Follow this manual to perform unlock or repair procedure.

3. Potentially supported Moto devices:
? XT1008 XT1025 XT1034 XT1036
? XT1078 XT1079 XT1085 XT1092
? XT1094 XT1095 XT1098 XT1254
? XT1514 XT1521 XT1523 XT1541
? XT1543 XT1544 XT1548 XT1550
? XT1556 XT1557 XT1561 XT1565
? XT1570 

If you have one of the listed above phone models,
please start unlock/repair operation and post your logs in the corresponding thread of the official forum

Activate Pack 4 to perform service procedures for more than 200 of new
Qualcomm based devices, including Sony, Motorola, ZTE and others.


Download Smart-Clip2 Software v1.17.01

Available link for download

CyanogenMod 13 Unofficial Moto G 3rd Generation

1. After downloading the .zip and gapps that flasheamos, we will save on the external microSD card because when you delete the internal memory wipe and making our data safely we pass to step 2.
2. Well, now, through an application or activation buttons recovery, the smartphone will restart in recovery mode.
3. Once inside the recovery, in our case, we recommend using TWRP, we will make a full wipe (if we repeat the process, the better).
4. After the install option by zip, we choose our microSD card the downloaded ROM file. Installation and wait to pass to the next step.
5. Now in the same section of the .zip find gapps we download and store on the microSD and install. (If you do not install the gapps Google Play we will not have to run our smartphone 100%).
6. Once installed, access to the menu to reboot and restart the system.

Available link for download