Sunday, September 4, 2016
How to make your battery properly wipe
How to make your battery properly wipe
How to make your battery properly wipe - One of the most common problems we encounter those who are constantly making changes or Firmware Roms our Android devices is that the battery life is quite suffers, and eventually last us much less than it should take us.
In Roms based on ICS or MIUI, it is a proven fact, as they consume rather more battery than normal by comparison with the original for our devices Roms Stock, also depends heavily on the use ourselves we give our terminals, but as overall we should last longer than it actually last.
This is because the battery makes us literally crazy and not really know which load percentage is in reality, it may be that as we change the firmware or Roms, if we are not doing correctly Wipe Battery Stats, the battery of our live device deceived and think that is already fully charged when not even be 50% of its capacity.
With so then I will explain, we will have to learn two simple methods of how to make a Wipe Battery Stats in the right way.
One is simply an application available on the Play Store following its simple instructions, the other system and I personally recommend, it will do so from the modified-Recovery ClockworkMod our rooted terminal.
Wipe Battery Stats do using the Battery Calibration application
- Primea what we should do is to unburden the app from the Play Store or by clicking here.
- Once you have installed on our device, we execute it and we will give you root permissions.
- Once opened connect the mobile charger, preferably at the mains charger no USB to computer.
- When the application at hand and visually sound advise us that our battery is charged to 100%, we still leave it charging about 20 minutes to 30 minutes more.
- Now we will press the button that says Battery Calibration will confirm if we should ask as the message that the battery is now calibrated, we can disconnect the charger from the device we report.
- Now we can use the device normally, and we let the battery completely runs out, until the terminal is turned off.
- In this step the device off, as it has completely exhausted the battery, connect the charger again and leave it loaded without disturbing or interrupting until he tells us that it is 100% charged.
- What will light and use it regularly, but leaving again to exhaust the battery before turning off, and the same way we did before will connect to its charger and leave it unmolested until it reaches 100% again.
With this we have done correctly Wipe Battery Stats using the aforementioned application, now I will tell you the same method but without using any third-party application, we will from our Android Recovery.
(Recommended method): How to make Wipe Battery Stats in our battery from ClockworkMod Recovery
- Connect the device to your electrical charger and wait until the battery is 100%. Once tell us it is 100%, we wait a half hour before disconnecting or proceed to the next step. The load can do indifferently to the terminal on or off.
- Once this 100% charged and having left that half hour more, without unplugging the charger, will quench the terminal and will light in Recovery mode.
- Within the Recovery descend to the Advanced option and within select Wipe Battery Stats and confirm.
- Back to the main screen of Recovery, all without disconnecting charger, and select Reboot System Now.
- Wait for the device to start fully and once operative it is when will disconnect the electric charger.
- As with the application we make two charging cycles, this means that we will leave you completely use up the battery until the charge device and pull it off and unmolested until this 100%, once it is full will load as before and leave it to fully discharge to repeat the full load without disturbing the device.
With this we have the battery of your Android properly calibrated and youve returned to the reality of their loading and unloading, now it just depends on how you use it so that it lasts more or less.
Available link for download
