Showing posts with label solve. Show all posts
Showing posts with label solve. Show all posts
Sunday, August 28, 2016
HOW TO SOLVE BLACKBERRY BB10 ERROR 0020
HOW TO SOLVE BLACKBERRY BB10 ERROR 0020
HOW TO SOLVE BLACKBERRY BB10 ERROR 0020
This error usually occur on blackberry 10 model listed below:
blackbeery q5
blackberry q10
blackberry z30
when it booted up, a red battery pops up with an exclamation and then the address "www.bberror.com/bb10-0020"
battery pops up with an exclamation
and then the address
www.bberror.com/bb10-0020
How to solve this problem
- Replace the battery with a new one
- Use Blackberry Playbook Charger to charge the battery
- Change the battery connector
U can read more on how to solve blackberry error code below
..............................................................................................................................................................
BLACKBERRY ERROR CODE AND THERE MEANING WITH SOLUTION
330-339 Failed applications
Run the Application the Loader to reload the operating system and applications on a portable device.
340-343 Memory failure
You will receive one of the following error messages on your phone:
Device Error 340
Device Error 341
Device Error 342
Device Error 343
Causes
Fault memory .
Solutions
Reduce the number of calendar notes synced with your phone.
1. In the BlackBerry the Desktop Manager click the "Sync". Press the "Sync" (left side menu). Click the button "Sync" in the main window.
2. In the window that appears in the application list, select Calendar.
3. Select Configure> Mail Client> Sync direction.
4. In the "Date Range", do one of the following tasks to reduce the number of calendar entries that are synchronized to your device:
- If you click on the transfer of only the elements of the future, only the future calendar events are synchronized with your phone.
- If you press the transmit data in a range of days and enter a range of dates in the following fields, then scheduled events within the date range will be synchronized with your device.
5. Click "Next" and "Finish" to save your changes and close the window.
6. The remaining configuration window, make sure the check box next to the calendar, then click OK.
7. In the left side menu, click on the tab "Synchronize", make sure the check box is selected to synchronize your organizer data, and then click Synchronize. It should reduce the number of calendar entries on your phone.
If the error persists, run the Application the Loader to reload the operating system and applications on your phone.
395 Unclassified error code
You will receive the following error on your device BlackBerry:
The Device the Error 395
reasons :
395 unclassified device error is the error code. This error can be caused by either a third-party application installed on the phone.
Solution 1
Make of hard the reset the phone: switch off the phone, remove the battery, wait a few seconds ... the battery, and hope for a successful boot.
Solution 2
Erase data and reset your phone.
1. Launch the BlackBerry Desktop Manager iproizvesti backup device.
2. In the BlackBerry Desktop Manager, double-click the application icon Loader.
3. Click the "Next" button. Select the firmware, if more than one.
4. Ensure that the required applications are selected, and then click Next.
5. Click the Advanced button.
6. Select the option to "Erase all application data and erase all applications installed," and then click Next.
7. Click "Finish". The data will be erased from the phone, and the operating system and applications are loaded again to clean the device.
8. Use the backup and restore option to restore the data stored in the backup file.
400-564 pages Errors
Run the Application the Loader to reload the operating system and applications on a portable device.300-303 Failed loading
Run the Application the Loader to reload the operating system and applications to your phone.
350-359 Software application errors
You will receive one of the following error messages on your phone:
Device Error 350
Device Error 352
Device Error 353
Device Error 354
Device Error 355
Device Error 356
Device Error 357
Device Error 358
The Device the Error 359
Causes
Software application errors.
Solutions
Make of hard the reset the phone: switch off the phone, remove the battery, wait a few seconds ... the battery, and hope for a successful boot.
OR
Start the Application the Loader to reload the operating system and applications on a portable device. In the wizard, do not select the third-party applications. In the advanced settings, select the check box Remove all installed applications.
360-363 Flash memory failure
Start the Application the Loader to reload the operating system and applications on a portable device.
365-368
Contact your service provider.
410 radio failure
Start the Application the Loader to reload the operating system and applications on a portable device.
Note : If the problem persists, contact your service provider.
507 No naustroystve BlackBerry Apps
You will receive one of the following errors on your BlackBerry device using the Application the Loader to install the device software:
The Device the Error 505
The Device the Error 507
Both errors indicate that the application is not loaded on the BlackBerry device.
Cause 1
In the process, the Application the Loader , have been removed existing applications on your BlackBerry device, but was unable to download the new.
Decision
Follow these steps:
1. Make sure that the firmware for your phone installed on the computer.
2. If your BlackBerry is connected to your notebook via the docking station, disconnect the docking station and connect the device directly to your computer.
3. If third-party software (such as antivirus software) uses the same COM- port as BlackBerry Desktop Manager, turn off these programs to free COM- port.
4. If you are using an adapter to connect USB- BlackBerry cherezCOM- port on the computer, temporarily connect the device directly to your computer via USB.
5. In the Desktop Manager, click the Application the Loader .
6. Use the Application the Loader to install the software on the device.
Cause 2
You have deleted all data and applications on your device BlackBerry, by entering an incorrect password ten times during the use of the Application the Loader .
Decision
Follow these steps:
1. In Desktop Manager, click the Application the Loader .
2. Use the Application the Loader to install the software on the device.
Available link for download
Thursday, August 11, 2016
Today I Will Share You How To Solve Common Error Facing In Androd Phone
Today I Will Share You How To Solve Common Error Facing In Androd Phone
Some people still find it difficult while others simply dont understand what to do when they face some problems or errors with their device or while using sp flash tool
Learn how to use sp flash tool from here
S_FT_ENABLE_DRAM_FAIL (4032)
This sometimes occurs when you are trying to flash a wrong ROM to your device.
If you are sure that the firmware you are using is the exact one of your device, format the phone before you flash it.
S_NOT_ENOUGH_STORAGE_SPACE (1011)
This error pops up when size of the firmware (ROM) you are trying to flash is bigger than the space given on the phone.
Try using another version of sp flash tool. Sometimes this error occurs when using a wrong ROM.
S_UNSUPPORTED_OPERATION (1040)
The scatter file loaded is wrong. load the scatter file of your device.
S_COM_PORT_OPEN_FAIL (1003)
This error is seen when the com ports on your PC are disabled.
Try enabling com ports in your BIOS
S_COM_PORT_OPEN_FAIL (1013)
This error is just almost like the the 1003 error. Check if your com ports are available if not enable them. But most of the time using a new version of SP Flash Tool solves this problem.
S_UNSUPPORTED_VER_OF_DA (1022)
If you get this error, Use a newer version of SP Flash Tool.
S_DA_EXT_RAM_ERROR (3001)
Connection problems. Check USB cord or use another port.
S_DA_EMMC_FLASH_NOT_FOUND (3144)
Wrong scatter file used
S_FT_DOWNLOAD_FAIL (4008)
Change USB cord or
Use Battery to flash the phone or
Change the version of SP Flash Tool. (Older versions preferable)
S_INVALID_DA_FILE (5002)
Use another version of SP Flash Tool
Device boots and hangs on logo
Device gets error messages like com.android.xxxxxx process has stopped.
Device boots and enters recovery mode (mostly happens after using OTA to update a rooted device)
First try a factory reset
To factory reset your device, boot into recovery by holding volume up and power button for about 3secs select factory reset from the list. (If you see the green android man, press volume up and power button again)
you can as well boot into the Chinese recovery by holding volume down and power button for about 3secs then select eMMC from the list.
If the solution above does not work for the device then you will have to flash the device using sp flash tool.
Download the stock ROM of the device. Download stock ROMs from here
Load the scatter file in sp flash tool
Flash only system.img that is tick only Android on the list shown sp flash tool after loading scatter file.
Click Download and connect your device.
Wait for the process to complete.
Do a full flash.
Download the stock ROM of the device. Download stock ROMs from here
Load the scatter file in sp flash tool
Select all the images present.
Click Download
Connect device and wait for process to complete.
Do the following below
Format the device before Download.
To format the device,
Download ROM of device.
Load scatter file of the device.
Goto Format tab and click Start button.
Connect the device and wait for process to complete.
Disconnect your device
Now enter back the Download tab and click Download button
Connect your your device and wait for flash process to complete.
Second Method
Donwload Miracle box Setup Or Crack From here
open it and navigate to mtk
tab on unlock/fix
check clear Anti-theft
click start botton
conect ur devices
while holding volume down key
wait still proccess complete
remove the usb cable
an power ON device
note: it may take upto 10-15 minite to boot...
Hear Boot sound, touch pad sounds but screen is dark or has funny colour
Flash device with ROM from a different source. (The ROM used has issues with device)
Do a factory reset
To factory reset your device, boot into recovery by holding volume up and power button for about 3secs select factory reset from the list. (If you see the green android man, press volume up and power button again)
you can as well boot into the Chinese recovery by holding volume down and power button for about 3secs then select eMMC from the list.
-Try flashing the device using firmware upgrade.
-Download another ROM from a different source
Available link for download
Subscribe to:
Posts (Atom)